Loading...
Serving Vallejo, CA and surrounding areas. (707) 917-3870
Your garage or living space floor is cracked, stained, or just plain ugly. Metallic epoxy turns that concrete into a seamless, high-gloss surface that holds up for years.
Metallic epoxy flooring in Vallejo is a thick, multi-coat system poured directly over your concrete slab - it cures into a seamless, glossy surface with swirling three-dimensional color effects, and most residential installations are complete in two to three days.
If you have a garage, bonus room, or living space in Vallejo with a bare or deteriorating concrete floor, metallic epoxy is one of the most effective upgrades you can make. The coating bonds directly to your existing slab, so there is no demolition - just a finished surface that looks intentional and holds up to daily use.
Many homeowners start here and then ask about urethane cement flooring for utility spaces that see heavier moisture or chemical exposure. Both are good systems - the right one depends on how you use the space.
If you see small craters or chunks of concrete breaking away from your garage floor, the slab is deteriorating - often accelerated by Vallejo's moisture-heavy bay climate. A metallic epoxy coating bonds to the stable concrete beneath and seals it. Left untreated, a pitting floor gets harder and more expensive to coat over time.
Hairline cracks are common in older Vallejo homes - decades of minor seismic movement gradually open them up. If cracks seem wider than they were a few years ago, have a contractor look before they get worse. They can fill and stabilize the cracks before applying a coating, and catch any that might cause problems later.
Bare concrete is porous, so motor oil, rust from metal shelving, and chemical spills soak in and stay. If scrubbing and degreasers have not made a dent, metallic epoxy is one of the most effective ways to cover those stains permanently. The sealed surface wipes clean with a mop.
Many Vallejo homeowners are turning garages into home offices, gyms, or ADU-style spaces. A bare concrete floor does not fit that use - it is cold, dusty, and hard to keep clean. Metallic epoxy transforms the same slab into a surface that looks finished and professional without the cost of tearing out the concrete.
Every metallic epoxy project starts with full surface preparation - diamond grinding, crack filling, and moisture testing. We then apply a primer coat, the metallic base layer with your chosen color and swirl pattern, and a clear UV-resistant topcoat that protects the design and makes the surface easy to clean. If you want an anti-slip texture added to the finish, that is a small addition we recommend for any garage in Vallejo where tracked-in moisture from bay fog is a regular occurrence.
Beyond metallic epoxy, we also offer standard epoxy floor coatings for homeowners who want the durability and seal of epoxy with a solid color or flake finish rather than the metallic look. Both systems start with the same critical prep work - which is what separates a floor that lasts 15 years from one that peels inside of two.
Best for homeowners converting a garage, workshop, or bonus room into a finished, attractive space.
Designed for vehicle traffic, oil exposure, and the moisture conditions common in Vallejo garages.
Ideal for anyone who wants a one-of-a-kind look - each metallic pour produces a unique swirl pattern.
Recommended for any high-gloss floor in a space that sees wet feet, fog moisture, or vehicle traffic.
Vallejo sits at the northern edge of San Francisco Bay, and that location creates a real moisture challenge for any floor coating. The soil stays damp year-round, and that moisture works its way up through concrete slabs - especially in homes built before 1980, which make up a large share of Vallejo's housing stock. A contractor who skips moisture testing before applying a metallic epoxy coating is setting that floor up to bubble and peel within a year or two. We test every slab before we touch it, and we address any moisture issues with a blocking primer before the decorative coating goes down.
California also has strict air quality rules governing the products contractors can use - enforced by the California Air Resources Board. We use CARB-compliant, low-emission coatings on every job, which means less chemical smell during installation and a safer environment for your household afterward. We work across the full Vallejo area, including customers in Benicia and American Canyon, where the same bay-influenced soil conditions apply.
Call or submit the form and we will respond within one business day. We ask about your space, the floor's current condition, and what you are hoping to use the room for - then schedule a free in-person visit so we can give you an accurate written quote.
We check for cracks, old coatings, and moisture - including a moisture test that is standard practice for every job in Vallejo's bay climate. This is how we catch anything that could cause a failure down the road, and it is what allows us to quote you accurately with no surprises on installation day.
We grind the slab, fill cracks, apply the primer and metallic layers, and finish with a protective topcoat. The prep phase is the noisiest part but also the most important - it is what makes the difference between a floor that lasts 15 years and one that peels in under two.
Light foot traffic is safe after 24 hours; vehicles need a full 72 hours. We do a final walkthrough before we leave, covering care instructions and what cleaning products are safe to use. The floor continues to harden over the following week.
Free estimate, no obligation. We respond within one business day.
(707) 917-3870Vallejo's bay climate means moisture coming up through a slab is a genuine risk, not a remote one. We perform a moisture test on every floor before we start - and if the reading comes back high, we use a blocking primer to address it before any decorative coating goes down. That step is why our floors stay bonded.
California's California Air Resources Board sets strict limits on the coatings contractors can legally use here. We use only compliant, low-emission products - which also means less chemical smell during installation and a safer environment for your family while the floor cures.
We look at your slab in person before we quote you - so we know exactly what prep it needs and can give you a firm written price. If your 1960s-era Vallejo slab needs extra crack filling or coating removal, you know that before we start, not after.
We are a local contractor based in Vallejo with a verifiable address and references from homeowners throughout CSLB-licensed work across Solano County. We know this area's soil conditions, older housing stock, and what it takes to make a coating hold here.
Every one of those points comes back to the same thing: a floor that actually holds up in Vallejo's specific conditions, installed by a contractor who looked at your slab before quoting you and followed through on what they promised.
A poured floor system built to handle heavy moisture, heat, and chemical exposure - a strong choice for garages or utility spaces that see harder use than a standard metallic epoxy is designed for.
Learn MoreThe same bonded-to-concrete durability as metallic epoxy, in solid colors or decorative flake finishes - a practical choice when a bold metallic look is not the priority.
Learn MoreOur calendar fills up fast in spring and summer - reach out now to hold your date before the busy season books up.